ProPoint Plus Optical ‘Smoke’ detection
Aspirating detection is now a recognised solution for many different fire detection applications. ProPoint Plus provides up to four separate detectors within a common aspirator enclosure and therefore provides four individually identifiable areas of detection per aspirator.
Each of the four plug-in ‘Scatter Chamber Detectors’ (SCD)’s detector modules are Optical detection only. Independent and integrated alarm decision making through the use of complex algorithms extend the range of particle detection, confirm genuine alarms and reduce unwanted alarms.
Installation, configuration and commissioning of ProPoint PLUS detectors is very simple and installer friendly.
Configuration to either Class A, Class B or Class C sensitivity options is achieved through a multi-language, multi-function LCD display without the need for a laptop connection.
Detector set up allows the installer to configure the detector sensitivity to an equivalent setting, as a known number of point type smoke detectors for each Class A, Class B and Class C system. This ensures the system specifier, designer, installer and commissioning engineer configure the ProPointPlus SCD’s to the correct sensitivity for the particular application.
Aspirator fan speed and airflow configuration is a also a very simple process allowing ProPoint Plus aspirating detectors to be installed in a variety of applications with short and relatively long pipe runs.
SKUS:
61-986-10X-OP4S
